Fiberglas™ Thermal Insulating Wool (TIW) Types I-HP and II-HP insulations are off-white, noncombustible wool with resilient, inorganic glass fibers bonded with a thermosetting resin. TIW Type I-HP insulation is available in rolls, TIW Type II-HP insulation comes in batts.
Owens Corning Fiberglas™ Insulation Board, TIW Type 2 Style, 2 in Thickness, 24 in Width, 48 in Length, Unfaced Facing, Density: 2.5 pcf, 0.22 to 0.64 Btu-in/hr-sq-ft-deg F Thermal Conductivity, 1000 deg F, Fiberglass, Off-White
Color |
: |
Off-White |
Density |
: |
2.5 pcf |
Facing Type |
: |
Unfaced |
Length |
: |
48 in |
Material |
: |
Fiberglass |
Style |
: |
TIW Type 2 |
Temperature Rating |
: |
1000 deg F |
Thermal Conductivity |
: |
0.22 to 0.64 Btu-in/hr-sq-ft-deg F |
Thickness |
: |
2 in |
Width |
: |
24 in |
- Excellent thermal performance contributes to lower fuel costs due to reduced heat loss
- Easy-to-handle and install
- The insulation is easily impaled over welded studs or pins or may be held in place with wire ties, metal lath or lagging
- There is no tendency for pin-hole elongation under vibration situations, a frequent source of heat leaks in heavy products
- Large batts or blankets cover greater areas quickly, eliminating tedious block-by-block hand layup and drilling for studs in hard insulations
- Can be used in direct contact with steel, copper and aluminum without corrosive effects
-
Catalog
https://cx1content.unilogcorp.com/cx1/view/api/asset/v1/dam/assets/ITEM/DOC/file/267/Owens_Corning_142047_Catalog.pdf
-
SDS
https://cx1content.unilogcorp.com/cx1/view/api/asset/v1/dam/assets/ITEM/DOC/file/267/Owens_Corning_OT1_5X24X48_SDS.pdf
-
Specification Sheet
https://cx1content.unilogcorp.com/cx1/view/api/asset/v1/dam/assets/ITEM/DOC/file/267/Owens_Corning_OT1_5X24X48_Specification_Sheet.pdf