Fiberglas™ Thermal Insulating Wool (TIW) Types I-HP and II-HP insulations are off-white, noncombustible wool with resilient, inorganic glass fibers bonded with a thermosetting resin. TIW Type I-HP insulation is available in rolls, TIW Type II-HP insulation comes in batts.
Owens Corning Fiberglas™ Insulation Board, TIW Type 2 Style, 2 in Thickness, 24 in Width, 48 in Length, Unfaced Facing, Density: 2.5 pcf, 0.22 to 0.64 Btu-in/hr-sq-ft-deg F Thermal Conductivity, 1000 deg F, Fiberglass, Off-White
| Color | : | Off-White |
| Density | : | 2.5 pcf |
| Facing Type | : | Unfaced |
| Length | : | 48 in |
| Material | : | Fiberglass |
| Style | : | TIW Type 2 |
| Temperature Rating | : | 1000 deg F |
| Thermal Conductivity | : | 0.22 to 0.64 Btu-in/hr-sq-ft-deg F |
| Thickness | : | 2 in |
| Width | : | 24 in |
- Excellent thermal performance contributes to lower fuel costs due to reduced heat loss
- Easy-to-handle and install
- The insulation is easily impaled over welded studs or pins or may be held in place with wire ties, metal lath or lagging
- There is no tendency for pin-hole elongation under vibration situations, a frequent source of heat leaks in heavy products
- Large batts or blankets cover greater areas quickly, eliminating tedious block-by-block hand layup and drilling for studs in hard insulations
- Can be used in direct contact with steel, copper and aluminum without corrosive effects
Catalog