Versi-Foam®2 lb closed cell spray foam insulation kits are available in two different formulations standard formula and class I (flame-retardant) Formula. The standard formula provides an R-value of 7.7 at a 1 in thick. Recommended for most commercial and industrial applications, the standard Formula is ideal for air sealing, wall or ceiling insulation, condensation control, sound dampening, structural enhancement, tank and pipe insulation, roof repair, marine flotation, truck/trailer insulation, sculpting and molding, pool and spa insulation and much more. Packaged in two cartons. The system is complete with the two chemical components, our patented U-control dispensing gun attached to two 15 ft hoses, ten mixing nozzles, three fan tips and nitrile gloves. Will produce 600 sq-ft of cured foam at a 1 in thick or 50 cu-ft.
Versi-Foam® Closed Cell Low Pressure Spray Foam Kit, Brown/Clear to Dark Amber, Composition: Polymethylene Polyphenyl Isocyanate Containing 4,4' Methylene Biphenyl Isocyanate, Tetrafluoroethane Part A, Polyol Blend, Pentamethyldiethylenetriamine, Organotin Mixture, Flame Retardant Mixture, Tetrafluoroethane Part B, R-Value: R7.7, 30 to 40 s Tack Free Time, -250 to 250 deg F, 50 cu-ft Coverage Area.
“Sales of this product are restricted in CA, CO, DE, ME, MD, MA, NJ, NY, RI, VT, VA, and WA due to environmental regulations regarding hydrofluorocarbons (HFCs). Regulations change frequently. For the most current HFC compliance information, contact your state's environmental agency.”
| Color | : | Brown/Clear to Dark Amber |
| Composition | : | Polymethylene Polyphenyl Isocyanate Containing 4,4' Methylene Biphenyl Isocyanate, Tetrafluoroethane Part A, Polyol Blend, Pentamethyldiethylenetriamine, Organotin Mixture, Flame Retardant Mixture, Tetrafluoroethane Part B |
| Coverage Area | : | 50 cu-ft |
| R-Value | : | R7.7 |
| Tack Free Time | : | 30 to 40 s |
| Temperature Rating | : | -250 to 250 deg F |
- System 50 does not require any external power source
- Formula is tack-free in approximately 3 min
- This is useful in applications where the foam needs to flow to distant areas before it solidifies
SDS