PRO-SHIELD's are 360 deg thermal hanger shields designed to meet the broadest range of pipe support applications. They provide a continuous section of insulation with factory applied jacketing meeting ASTM E 96A (max 0.02 perm) through a wide variety of pipe hangers for pipe systems operating between +20 deg F and +1200 deg F. The insulation and jacketing extend beyond the galvanized steel shield for a neatly sealed joint with the adjoining insulation. PRO-SHIELD's are suitable for use in any type of clamp as well as in band-type hangers and on flat surfaces. To assure proper support in all situations, high-density 450 psi inserts are installed in units for 10 in pipe with 1 in insulation thick and in all units for 12 in pipe and larger.
VEP 360 deg Thermal Hanger Shield, 20 in, 2 in Thickness, 10 in Length, Material Gauge: 12 ga, Calcium Silicate
| Length | : | 10 in |
| Material Gauge | : | 12 ga |
| Material | : | Calcium Silicate |
| Size | : | 20 in |
| Thickness | : | 2 in |
- Chilled to steam piping and dual temperature lines
- Hanger spans per MSS SP-58 Table A3
- 100 psi calcium silicate meeting ASTM C-533 Type 1, C-585, C-795, E-84, thermal conductivity ('k')=0.40 at 75 deg F
- Adhesive complying with NFPA 90-A, ASTM E-84
- G-90 galvanized steel shield, small check per ASTM A-653 (replaces A-527)
- Factory applied jacketing meeting ASTM E 96A (maximum 0.02 perm), ASTM D-774, D-828 and E-84
- Structural insert minimum 450 PSI calcium silicate meeting ASTM C-656 Type II, Grade 5, C-795 and E-8
- All units and components are asbestos free and 100% made and assembled in the USA
Specification Sheet