Sound SEAL®'s pipe and duct wrap acoustic insulation is the solution for noise control and sound-proofing of noisy pipes and duct works. Sound Seal® pipe and duct wrap or lagging consists of a mass loaded noise barrier with reinforced foil facing on one side bonded to a 1 or 2 in sound absorbing quilted fiberglass decoupler respectively. Sound SEAL®'s B-10 LAG/QFA-9 is a composite material featuring a flexible 1 lb/sq-ft reinforced foil faced loaded vinyl noise barrier bonded to a 2 in THK scrim faced quilted sound absorber/decoupler. Used to wrap noisy pipes, ducts, valves and fan housings. Typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it. The quilted fiberglass decoupler also provides sound absorption and thermal insulation around the pipe or ductwork. The 2 lb/sq-ft barrier and the two inch thick quilted fiberglass absorber improves overall acoustical performance, especially at low frequencies. The reinforced foil exterior readily accepts a matching lag tape for easy installation and also serves as a protective jacket for indoor or outdoor applications.
SOUND SEAL® B-20 Lag QFA9 Pipe and Duct Wrap, 30 ft Length, 54 in Width, R-Value: 9, Fiberglass/Vinyl, -20 to 220 deg F
| Length | : | 30 ft |
| Material | : | Fiberglass/Vinyl |
| R-Value | : | 9 |
| Series | : | B-20 Series |
| Temperature Rating | : | -20 to 220 deg F |
| Width | : | 54 in |
- Extremely easy to install
- 100% adhesion coverage between barrier and quilt
Specification Sheet