Thermal Ceramics FireMaster® FMD1/2X32X300 Dryer Wrap, 300 in L, 32 in W, 1/2 in Thick, Aluminum Foil
Thermal Ceramics FireMaster® FMD1/2X32X300 Dryer Wrap, 300 in L, 32 in W, 1/2 in Thick, Aluminum Foil- Manufacturer: Morgan Advanced Materials
- Brand: Thermal Ceramics
- Item ID: 7PWXTCFMD1/2X32X300
- MPN: 434879103707D2
FireMaster® dryer wrap is designed for application on dryer vent ductwork in multi-unit housing where fire compartmentalization and life safety are major concern. FireMaster® dryer wrap is tested and UL listed for 1 hr fire resistance on light gauge construction up to 7 in Dia or 10 x 4 in rectangular duct penetrating 1 hr rated wood joist gypsum floor, therefore providing owners, architects and engineers a viable and cost effective solution for safely routing dryer exhausts from the laundry room to the exit of the building. DryerWrap is 67% thinner, lighter and appreciably more flexible than grease duct fire wraps. The optimized thickness and approved 1 in. compression or overlap joints provide for significant installation cost and space savings.
Thermal Ceramics FireMaster® Dryer Wrap, 300 in Length, 32 in Width, 1/2 in Thickness, Density: 8 pcf, R-Value: R2.4, 16 ga Gauge, Aluminum Foil, 2100 deg F
| Density | : | 8 pcf |
| Gauge | : | 16 ga |
| Length | : | 300 in |
| Material | : | Aluminum Foil |
| R-Value | : | R2.4 |
| Temperature Rating | : | 2100 deg F |
| Thickness | : | 1/2 in |
| Width | : | 32 in |
- Fully encapsulated in scrim reinforced foil facing
- 1 in compression or overlap at joints allows for installation inside, 5 in space for typical 4 in round duct
- Installation using 16 ga galvanized steel tie-wire
- Optimized installation cost
- Optimized installation space
- Easily cut
- More flexible than alternative wraps
Specification Sheet