Owens Corning FOAMULAR® NGX™ 400 1130950 Extruded Foam Insulation, 2 in Thick, 48 in W, 96 in L, R5 R-Value, Pink
Owens Corning FOAMULAR® NGX™ 400 1130950 Extruded Foam Insulation, 2 in Thick, 48 in W, 96 in L, R5 R-Value, Pink- Manufacturer: Owens Corning
- Brand: Owens Corning
- Item ID: 3BBSOC400NGX248
- MPN: 1130950
Owens Corning® FOAMULAR® and FOAMULAR® NGX™ 400/600/1000 are high-strength extruded polystyrene (XPS) insulation products designed for use in engineered applications requiring additional loadbearing capability, such as under slab, concrete floors, foundations, roadways and rail beds, plaza and parking decks and cold storage installations. FOAMULAR® and FOAMULAR® NGX™ 400/600/1000 can also be used in tapered insulation systems when higher compressive strength is needed.
Owens Corning Extruded Foam Insulation, Model: 400, 2 in Thickness, 48 in W, 96 in L, R-Value: R5, 1.8 cu-ft/lb Density, 165 deg F, Compressive Strength: 40 psi, Flexural Strength: 120 psi, Polystyrene Foam, Pink, 0.3% Water Absorption, 1.1 perm Water Vapor Permeance
| Additional Information | : | 0.3% Water Absorption, 1.1 perm Water Vapor Permeance |
| Color | : | Pink |
| Compressive Strength | : | 40 psi |
| Density | : | 1.8 cu-ft/lb |
| Flexural Strength | : | 120 psi |
| Length | : | 96 in |
| Material | : | Polystyrene Foam |
| Model | : | 400 |
| R-Value | : | R5 |
| Temperature Rating | : | 165 deg F |
| Thickness | : | 2 in |
| Width | : | 48 in |
- FOAMULAR® and FOAMULAR® NGX™ XPS insulation are non-structural materials and must be installed on framing that is independently braced and structurally adequate to meet required construction and service loading conditions
- FOAMULAR® and FOAMULAR® NGX™ XPS insulation can be exposed to the exterior during normal construction cycles
- During that time, some fading of color may begin due to UV exposure and if exposed for extended periods of time, some degradation or dusting of the polystyrene surface may begin
- For horizontal applications, turn print side down when possible so the black print does not show to the sun, which may at times act as a solar collector, raising the temperature of the foam under the print to an unacceptable level
- Once covered, the deterioration stops and damage is limited to the thin top surface layers of cells
- If improperly covered and exposed to the right combination of sun, time and temperature, FOAMULAR® and FOAMULAR® NGX™ insulation deformation damage may occur rapidly
Catalog
Video Link