RG-2400® ET is a surface conversion compound utilizing mineralization technology or the Science of Minetics. This compound replaces the corrosion process with a mineral formation on and into the metal creating a mineral barrier 50 to 200 angstroms deep into the metal surface. RG-2400® products are a breakthrough for corrosion control and prevention on piping systems, tanks and vessels under insulation. RG-2400® ET is an elevated temperature non-drying gel compound which can be easily brush/spray applied to pipes, fittings, valves, tanks and vessels. This version of RG is designed to be used on hot surfaces with service temperatures up to 350 deg F. Most frequently used on dual temperature cyclical lines. RG-2400® ET helps prevent corrosion from occurring and it also helps stop existing corrosion from advancing. It requires minimal (wire brush off the scale) preparation. Installation thicknesses of 25 to 30 mil allow the unique formulation to heal any subsequent breach (mechanical damage) of the mineral barrier and the RG-2400® ET formula is so unique, that even if the vapor barrier is breached allowing moisture into the system, the RG-2400® ET will buffer any moisture that migrates through it to an elevated pH. RG-2400® ET cleans easily with commercially available citrus cleaner followed by soap and water.
Polyguard® RG-2400® ET Anti-Corrosion Gel, 1 gal Net Content, Pail Container, Composition: Octadecyl 3-(3,5-di-Tert-Butyl-4-Hydroxyphenyl) Propionate, Paste Form, Bluish Gray, 0.95 to 1.05 Specific Gravity, 290 deg F Flash Point, 350 deg F
| Color | : | Bluish Gray |
| Composition | : | Octadecyl 3-(3,5-di-Tert-Butyl-4-Hydroxyphenyl) Propionate |
| Container Type | : | Pail |
| Flash Point | : | 290 deg F |
| Form | : | Paste |
| Net Content | : | 1 gal |
| Specific Gravity | : | 0.95 to 1.05 |
| Temperature Rating | : | 350 deg F |
- RG-2400 ET is an elevated temperature non-drying gel compound
- For high temperature service applications
- For use on any system up to 350 deg F
- Used on dual temperature cyclical lines
- Low high pressure steam
- Helps prevent corrosion from occurring
- Helps stop existing corrosion from advancing
SDS