BOSS® 180 MULTI-SEAL® is a one-component, moisture curing adhesive for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS® 180 MULTI-SEAL® has immediate grab and high bond strength allowing insulation to be hung in 24 hr. Check an anchor pin before hanging insulation to be sure it is secure. Cure times vary with humidity. BOSS® 180 MULTI-SEAL® forms a strong bond even on damp surfaces.
BOSS® by Soudal MULTI-SEAL® Insulation Anchor Pin System Adhesive, Cartridge Container, Paste Form, White, Composition: Amorphous Fumed Silica, Petroleum Distillates, Straight Run Middle, Dimethylpolysiloxane, Vinyl Oximino Silane, Methyl Oximino Silane, N-Beta-(Aminoethyl)-Gamma-Aminopropyltrimethoxysilane, -35 to 140 deg F, 24 hr Curing Time, 1.3 Specific Gravity, 47 g/L VOC, 220 psi Tensile Strength, Applicable Materials: Masonry, Metal
| Applicable Materials | : | Masonry, Metal |
| Color | : | White |
| Composition | : | Amorphous Fumed Silica, Petroleum Distillates, Straight Run Middle, Dimethylpolysiloxane, Vinyl Oximino Silane, Methyl Oximino Silane, N-Beta-(Aminoethyl)-Gamma-Aminopropyltrimethoxysilane |
| Container Type | : | Cartridge |
| Curing Time | : | 24 hr |
| Form | : | Paste |
| Specific Gravity | : | 1.3 |
| Temperature Rating | : | -35 to 140 deg F |
| Tensile Strength | : | 220 psi |
| VOC Content | : | 47 g/L |
- Works with either nylon or metal-based pins
- Immediate grab and high bond strength
- Insulation can be hung in 24 hr, check an anchor pin before hanging insulation to be sure it is secure, cure times vary with humidity
- Adheres to painted and galvanized surfaces
- Excellent thermal shock-resistance
- Water-resistant
- Low odor
- Use for rigid, fibrous and semi-rigid board insulation, masonry walls, ducts and metal buildings
SDS
Video Link