CHIL-LASTIC™ CP-79 is a multi-purpose, high-temperature sealant and coating. It is applied by trowel over all types of thermal insulations. Do not use in conjunction with polystyrene. Being an asphalt-based coating, CHIL-LASTIC™ CP-79 forms a tough, durable, heavy film when applied. It can be used at elevated temperatures. CHIL-LASTIC™ CP-79 should be allowed to cure at ambient temperature with thorough ventilation before hot lines, vessels or tanks are put into operation. Failure to do so may increase the possibility of residual solvent boiling out of the film.
Childers™ CHIL-LASTIC™ Sealant and Coating, 5 gal Net Content, Paste Form, Black, Solvent Odor/Scent, Composition: Asphalt, Oxidized, Stoddard Solvent, Crystalline Silica, Asphalt Base, 4 to 8 hr Dry Time, 3.2 sq-m/L Coverage Area, 1.03 Specific Gravity, 320 g/L VOC, 102 deg F Flash Point, 75 to 350 deg F
| Base Type | : | Asphalt |
| Color | : | Black |
| Composition | : | Asphalt, Oxidized, Stoddard Solvent, Crystalline Silica |
| Coverage Area | : | 3.2 sq-m/L |
| Dry Time | : | 4 to 8 hr |
| Flash Point | : | 102 deg F |
| Form | : | Paste |
| Net Content | : | 5 gal |
| Odor/Scent | : | Solvent |
| Specific Gravity | : | 1.03 |
| Temperature Rating | : | 75 to 350 deg F |
| VOC Content | : | 320 g/L |
- CHIL-LASTIC™ CP-79 exhibits good adhesion to most surfaces
- It is acid and alkali-resistant and will not-freeze, decompose or show settling or separation in storage
- CHIL-LASTIC™ CP-79 provides an excellent water and vapor seal
- It forms a tough, protective coating when cured, which does not tend to crack or peel during normal equipment operation
- CHIL-LASTIC™ CP-79 requires no special mixing or additives
SDS