1. pin-int

K-Flex INSUL-TUBE® 7/8-in ID (1/2-in IPS) X 2-in Elastomeric Pipe Cover

K-Flex INSUL-TUBE® 7/8-in ID (1/2-in IPS) X 2-in Elastomeric Pipe Cover
  • Manufacturer: K-Flex
  • Brand: K-Flex
  • Item ID: 3MNEK7/8X2
  • MPN: 6RX200078
  • LOG IN TO VIEW
  • PRICING & AVAILABILITY

K-FLEX® INSUL-TUBE® is a closed cell, flexible elastomeric tube foam insulation product used to retard heat gain and prevent condensation or frost formation on below-ambient applications. It can also be used with heat tracing tapes. K-FLEX® INSUL-TUBE® is black in color and is available in non-slit, 6’ length tube form in wall thicknesses of 3/8” up to 2” in diameter sizes ranging from 3/8” I.D. to 8” IPS (ID range is subject to variation depending on wall thickness). K-FLEX® INSUL-TUBE® is recommended for applications with service temperatures ranging from -297°F (-182°C) to +220°F (+104°C).

K-Flex INSUL-TUBE® Elastomeric Pipe Covering, Inside Diameter: 7/8-in, Iron Pipe Size: 1/2-in, Copper Tubing Size: 7/8-in O.D., Wall Thickness: 2-in, Application: Air Conditioning, Ammonia, Chilled Water, Refrigeration, Cryogenic, Duct Wrap, Cod Water and Hot Water Plumbing Applications, Color: Black, Construction: Closed-Cell, Density: 3 to 6 cu-ft/lb, Flame Spread Index: 25, For Pipe Size: 1/2 in IPS, Length: 6 ft, Material: Elastomeric Foam, R-Value: 16.1, Smoke Developed Index: 50, Temperature Rating: -297 to 220 deg F, Thermal Conductivity: 0.235 to 0.258 Btu-in/hr-sq-ft-deg F, Water Absorption: 0 %, Water Vapor Permeability: 0.01 perm-in

Application      :      Air Conditioning, Ammonia, Chilled Water, Refrigeration, Cryogenic, Duct Wrap, Cod Water and Hot Water Plumbing Applications
Copper Tubing Size      :      3/4 in
Density      :      3 to 6 cu-ft/lb
Flame Spread Index      :      25
For Pipe Size      :      1/2 in IPS
Inside Diameter      :      7/8 in
Iron Pipe Size      :      1/2 in
Smoke Developed Index      :      50
Sub Brand      :      Insul-Tube
Thermal Conductivity      :      0.235 to 0.258 Btu-in/hr-sq-ft-deg F
Water Absorption      :      0 %
Water Vapor Permeability      :      0.01 perm-in
  • Moisture vapor resistance
  • Retards heat gain and prevents condensation or frost formation on below-ambient applications
  • GREENGUARD certified as a low VOC and mold-resistant material
  • K-Flex USA products meet exacting industry standards, national building codes and are third party certified
  • K-Flex products are inherently mold and mildew-resistant as a result of their closed cell properties
  • As an added level of protection, an EPA approved antimicrobial agent has been added for maximum protection

RECENTLY VIEWED