K-Flex ECO 2-in ID (1-1/2-in IPS) X 1/2-in Elastomeric Pipe Cover

K-FLEX® ECO is a closed cell, flexible elastomeric foam insulation product used to retard heat gain and prevent condensation or frost formation on below-ambient applications. It can also be used with heat tracing tapes. K-FLEX® ECO is green in color and is available in 1/2”, 3/4” and 1” wall thickness in non-slit, 6’ length tube form in diameter sizes ranging from 3/8” I.D. to 8” IPS, sheet (3’ x 4’) and roll (4’ wide) form with or without PSA, and fitting form (elbows and tees) in diameter sizes ranging from 3/8” I.D. to 6” IPS. K-FLEX® ECO is recommended for applications with service temperatures ranging from -297°F (-182°C) to +250°F (+120°C).

K-Flex ECO Elastomeric Pipe Covering, Inside Diameter: 2-in, Iron Pipe Size: 1-1/2-in, Wall Thickness: 1/2-in, Application: Air Conditioning, Ammonia, Chilled Water, Refrigeration, Cryogenic, Duct Wrap, Cod Water and Hot Water Plumbing Applications, Color: Green, Construction: Closed-Cell, Density: 3 to 6 cu-ft/lb, Flame Spread Index: 25, For Pipe Size: 1-1/2 in IPS, Length: 6 ft, Material: Elastomeric Foam, R-Value: 2.6, Smoke Developed Index: 50, Temperature Rating: -297 to 250 deg F, Thermal Conductivity: 0.263 to 0.282 Btu-in/hr-sq-ft-deg F, Water Absorption: %, Water Vapor Permeability: 0.10 perm-in

• Moisture vapor resistance
• Factory applied double seal closure system for improved performance
• GREENGUARD certified as a low VOC and mold-resistant material
• K-Flex USA products meet exacting industry standards, national building codes and are third party certified
• K-Flex products are inherently mold and mildew-resistant as a result of their closed cell properties
• As an added level of protection, an EPA approved antimicrobial agent has been added for maximum protection