Transfer Pumps are required to move A and B materials to the reactor spray systems. The T3 Transfer Pump combines GRACO®’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump using less air pressure to provide the same fluid pressure required.
GRACO® Transfer Pump, 1/4 in Air Inlet, 21.7 bar Maximum Fluid Working Pressure, 0.69 MPa Maximum Air Inlet Pressure, 3:1 Ratio, Carbon Steel, NPT Air Inlet Thread Type, 3/4 in Fluid Outlet Size, NPT Fluid Outlet Thread Type, 120 deg F Ambient Temperature, 50.3 in Height
California residents see Prop 65 WARNINGS
| Air Inlet Size | : | 1/4 in |
| Height | : | 50.3 in |
| Material | : | Carbon Steel |
| Maximum Air Inlet Pressure | : | 0.69 MPa |
| Maximum Fluid Working Pressure | : | 21.7 bar |
| Ratio | : | 3:1 |
| Specifications | : | NPT Air Inlet Thread Type, 3/4 in Fluid Outlet Size, NPT Fluid Outlet Thread Type, 120 deg F Ambient Temperature |
- Easier to maneuver the overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig
- More quiet studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump
- Less maintenance the Merkur air-motor is based on air pilot valve technology
- The air-motor switching is purely pneumatic
- This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor
- Quick-disconnect feature for simple drum removal and faster change-out
- Easily handle higher viscosity materials even in cold conditions
- High-output pumps get the job done faster
- Designed for easy maneuverability and handling, easy maintenance and low noise
- Affordable options meeting your business and performance needs
- Polyurethane foam, polyurea material compatible material
Catalog