SPARK-FAS® adhesive is a quick-setting, non-flammable, fire-resistive, synthetic elastomer adhesive used to adhere duct wrap, fibrous glass or mineral wool insulations (up to 6 lb density) to galvanized steel and aluminum air conditioning or hot air ducts, where a fire-resistive dry film is required. Non-flammable chlorinated solvents eliminate explosion and fire hazards during application. SPARK-FAS® adhesive will adhere insulation to wood and concrete. In this application, the coverage may not be as great as shown at left. SPARK-FAS® adhesive gives superior service when it is used as a contact adhesive to cement the laps of aluminum foil, FSK, ASJ and FRK facings. SPARK-FAS® adhesive is produced under the classification and follow-up service of Underwriter’s Laboratories, Inc.
Foster® SPARK-FAS® Adhesive, 1 gal Net Content, Liquid, Off-White, Solvent, Composition: Methylene Chloride, Chlorinated Paraffin, Ethyl Alcohol, Titanium Dioxide, Stoddard Solvent, Tri(Nonylphenol)Phosphite, -20 to 180 deg F, 4.9 L/sq-m Insulation Attachment, 1.8 L/sq-m Lap Sealing, 1.29 Specific Gravity, 162 g/L VOC, Applicable Materials: Aluminum, Fiberglass, Galvanized Steel
|Applicable Materials||:||Aluminum, Fiberglass, Galvanized Steel|
|Composition||:||Methylene Chloride, Chlorinated Paraffin, Ethyl Alcohol, Titanium Dioxide, Stoddard Solvent, Tri(Nonylphenol)Phosphite|
|Coverage Area||:||4.9 L/sq-m Insulation Attachment, 1.8 L/sq-m Lap Sealing|
|Net Content||:||1 gal|
|Temperature Rating||:||-20 to 180 deg F|
|VOC Content||:||162 g/L|