WC-1 is a heavy-bodied, water-based, breathing type mastic, for use as a protective coating over all types of insulation systems, both indoors and outdoors. WC-1 may also be successfully used on masonry surfaces and primed steel when a water-based coating is desired offering durability, weather protection, chemical and oil resistance and beauty. In most applications, the recommended dried film thickness for WC-1 is 1/16 in. WC-1 is a thick, polyvinyl acetate emulsion which is suitable for application by trowel, palm or spray. Over properly designed insulation systems, WC-1, after drying, becomes a tough, durable, flexible film which provides maximum protection at a wide range of temperatures. It should not be applied where it will be subjected to standing water. WC-1 is suitable for application at ambient temperatures down to 40 deg F and where the temperature is not expected to be below 35 deg F for at least 24 hr after application. WC-1 contains no asbestos lead or mercury compounds. WC-1 must be protected from freezing during storage. After application until thoroughly cured, it must be protected from precipitation, freezing, oil, grease and foot traffic. WC-1 is USDA acceptable for use in meat, poultry and food processing plants.
VC PVA Weather Barrier Mastic, WC-1 Series, 5 gal Net Content, Paste Form, White, 40 to 110 deg F, 2 hr Dry Time, 13 sq-ft/gal Coverage Area, 8 to 9 pH, 1.23 Specific Gravity, 0.43 lb/gal VOC, 75000 cPs Viscosity, Applicable Materials: Masonry, Primed Steel
| Applicable Materials | : | Masonry, Primed Steel |
| Color | : | White |
| Coverage Area | : | 13 sq-ft/gal |
| Dry Time | : | 2 hr |
| Form | : | Paste |
| Net Content | : | 5 gal |
| Series | : | WC-1 Series |
| Specific Gravity | : | 1.23 |
| Temperature Rating | : | 40 to 110 deg F |
| VOC Content | : | 0.43 lb/gal |
| Viscosity | : | 75000 cPs |
| pH Range | : | 8 to 9 |
SDS