VC Thick-Kote™ THICKKOTEGRY2GL Vinyl Mastic Coating, Water Base, Paste, Gray, 2 hr Dry Time, 17 sq-ft/gal Coverage

Thick-Kote™ is a heavy bodied, water-based, general-purpose mastic, for use over all types of thermal insulation. Thick-Kote™ is breathing type mastic formulated for maximum toughness, a fast drying time and economical cost of material. It is higher in solids than other Vimasco weather barrier mastics and has a higher coverage rate. Thick-Kote™ is formulated for easy application by brush or trowel, but can also be sprayed if needed. Its recommended dry thickness ranges from 40 to 63 mil depending on the degree of protection required and when properly applied within this thickness range, it provides excellent protection from the elements, other sources of water and physical damage over a wide range of temperatures. These dry film thicknesses are achieved at a wet application of four to six gallons per 100 sq-ft. Thick-Kote™ should not be applied where it will be subjected to continual standing water or where the requirement is for a vapor barrier. Thick-Kote™ contains no asbestos, lead or mercury compounds. Thick-Kote™ must be protected from freezing during storage. After application, until thoroughly cured, it must be protected from precipitation, freezing, oil, grease and foot traffic.

VC Thick-Kote™ Vinyl Mastic Coating, 2 gal Net Content, Water Base, Paste Form, Gray, Composition: Vinyl Acetate, 40 to 100 deg F, 2 hr Dry Time, Flammability Limit: 0, Density: 1 pcf, 75000 cPs Viscosity, 1.26 Specific Gravity, 0.1 lb/gal VOC, 8 to 9 pH, Application Method: Brush, Trowel, 17 sq-ft/gal Coverage Area, 12 months Shelf Life